|
|
 |
|
The new flue gas analyser generation offers Customer Service and service technicians all the features required to compently carry out the measurement tasks at hand. Regardless of whether in the context of breakdowns or emergencies, during the monitoring of legal limit values or during daily maintenance assignments, testo 330-2 LL is a reliable partner for the complete spectrum of measurement tasks. With the option of carrying out NOlow measurements on lowNOx burner systems, this check – although not compulsory but relevant for the environment - can be completed to highest efficiency levels.
At a glance
Instrument diagnosis
- Automatic instrument leak test
- Rechargeable battery status display
- Sensor status display
- Monitoring of condensate trap level with "FULL" message
- Display of pump capacity (l/min.)
- Display of error status incl. description and diagnosis
- Display of last maintenance
- Display of instrument temperature
- Operating hour counter
Additional measurement tasks
- ΔT measurement, flow/return
- Ambient CO measurement
- Ambient CO2 measurement
- Detection of gas leaks with gas leak detection probe
- ΔP measurement for gas pressure
- Gas/oil flow rate determination
Automatic menu selection
- Recognition of connected probe
Initialisation of flue gas sensors without removal of probes
- Zeroing of exhaust gas sensors without removing the probe. The probe can remain in the flue during initialisation.
- Draught zeroing without removal of the probe. The probe can remain in the flue during zeroing (testo 330-2 LL only).
Memory management
- 400 measurement data (testo 330-2 LL) and 200 measurement data (testo 330-2) incl. plant address and system number
- Several measurement data records per system number are possible
- Read in using barcode reader
- IRDA interface for data transfer to PDA/Notebook
- USB interface for data transfer to PC
- ZIV driver for all conventional branch software
Additional features
- Interface to Testo Software with analysis and graphics functions and online measurement
- Interface to burners
- Calculated parameter: Flue gas dewpoint
- Graphics display
- Integrated impact protection with magnet, recessed display
- Protection class: IP40
- Rechargeable battery lifetime > 10 h with pump operating
- Rechargeable battery separate and rechargeable in instrument
- Adjustable alarm thresholds for ambient CO-/CO2 measurement
TÜV testing / EN norm
- Accuracy tested for O2, CO2, CO, NO, NOlow, °C, hPa
- TÜV By RgG 237 for testo 330-2, TÜV By RgG 251 for testo 330-2 LL acc. to 1. BImSchV/KÜO / EN 50379 Part 2 for O2, °C, hPa and CO
|
The set for Customer Service and service technicians
Testo has put together a special set for customer service and service technicians. Of course, it is always possible to add to and supplement the set by selecting from the comprehensive range of accessories available.
- Exhaust gas analyzer testo 330-2 LL
- 100-240 V mains unit for mains operation or battery recharging in instrument
- Modular flue gas probe, immersion depth: 300 mm, ø 8 mm
- Combustion air temperature probe, 190 mm long
- Hose connection set for separate gas pressure measurement
- IRDA printer
- Flexible probe shaft length 330 mm, Ø 10 mm, Tmax 500 °C
- Basic system case for analyser, probes and accessories
|
Deutsch